{"type":"img","src":"//cdn.quv.kr/k2hl6wry7/up/60f4d9769c555_1920.png","height":60}
  • 회사소개
  • 사업분야
  • 제품소개
  • 파트너
  • 고객지원
  • Weng SHOP
  • {"google":["Questrial","Noto Sans"],"custom":["Noto Sans KR"]}
    ×
     
     
    섹션 설정
    {"type":"img","src":"//cdn.quv.kr/k2hl6wry7/up/5f922b2fac9a0_1920.png","height":"40"}
  • 회사소개
  • 사업분야
  • 제품소개
  • 파트너
  • 고객지원
  • Weng SHOP
  • S.I / Distributor

    Company

    Business

    Manufacture

       Home     >    제품소개       >     HAWKE

    해당 이미지는 미리보기 이미지입니다 , 파일을 눌러 더 많은 제품을 둘러보세요 !!   HAWKE Frames/Sleeves_1_01

    Frames/Sleeves

    Frames HMX


    Type HMX (For Marine Applications), thickness 10mm without flange.

    These types of frames are to be welded to the bulk or deck.

    Frames HMFX


    Has a 60mm wide flange and is available in the same materials and finishes as HMX frames. For overall dimensions of HMFX frames add 120mm (allowance for flange) to those given for standard HMX frames.

    Frames HMEX


    A standard HMX frame extended using a welded collar.

    For use in corrugated bulkheads or to fit the frame above deck level. For overall dimensions of HMEX frames add 20mm to external measurements of standard HMX frames.

    Frames HMBX


    For sealing cable routes in uninsulated HO rated areas or similar applications.

    Add 20mm to external dimensions of standard HMX frames to determinate overall width

    and height.

    Blocks

    Hawke Standard Tolerant Blocks


    The Hawke cable blocks have a tolarance that is achieved by having 5 points of contact with the cable that guarantees the sealing of the cable even if it is deformed.
    Thanks to this tolerance, each Hawke block covers a range of diameters between 3 and 4 mm. It is not necessary to mainpulate the block, as this tolerance is archieved by deforming it when the system is compressed.

    Hawke Blank Filler Blocks


    Filler blocks are available in the same maerials as the tolerant Blocks. They are used to fill spaces within the frame which are not required for services, thus allowing spare capacity for future requirements.

    Hawke Trefoil Insert Blocks


    These blocks allow three single phase power cables to be sealed inside of the same cable block. "Available in 90mm and 120mm size"

     

    Hawke Special Insert Blocks


    When Hawke Transit System Frames are penetrated by services that are shaped anything other than circular, eg. Busbars, special cables, earthtraps, etc.

    Hawke Wave Guides


    Hawke manufacture a range of blocks to suit the most popular waveguides sizes.

    Hawke wave guide insert blocks are used inserted in standard HF Blocks.

    Round Transits System

    Hawke Round Transit (HRTO)


    Certified for both Civil and Marine applications.
    The HRTO has been designed to be sealed using standard Hawke tolerant blocks.

    Hawke HRTO provide effectively sealing of cables and pipes through a circular aperture.
    Hawke HRTO is suppied as an OPEN frame, so that it can be installed after laying the cables or pipes. 

    Hawke Round Transit (HRST)


    Certified for Marine applications.
    Hawke HRST is a round sealing solution for a single/pipe passing through a wall or bulkhead/deck.
    Each size of HRST frame can seal a large range of diameters without any onsite modifications.
    To seal services from 4mm to 170mm of external diameter (standard version).

    Compression System

    Hawke Compresion System


    The Hawke compression system has 2elements. The End Packer and theCompression Plate.
    Unique steel insert pins on both sides of the Hawke Transit Compression System ensure that the correct level of compression is applied to each installation, without the need for special knowledge or decision on the part of the installer.

    Round Corner Compresion System


    The Unique Hawke Round Corner Compression System is used in HMCX rectangular frames to compress and seal the installation of cables/pipes and HF modules.

    Accessories and Installation Tools

    Compression Tool


    This re-usable compression tool is designed to apply compression to the system before placing the endpacker within the frame.

    Lubricant


    Hawke Lubricant is used to during an installation.

    {"google":["Questrial","Roboto"],"custom":["Noto Sans KR","Nanum Gothic"]}{"google":["Questrial","Noto Sans","Roboto"],"custom":["Noto Sans KR","Nanum Gothic","Nanum Barun Gothic"]}
    {"google":[],"custom":["Noto Sans KR"]}
    간편하게 만드는 무료 홈페이지 큐샵
    시작하기